Vendor: Cisco
Exam Code: 210-260
Exam Name: Implementing Cisco Collaboration Devices v1.0
QUESTION 1
The Voice engineer in your company need to change IP address destination on SIP-Trunk on near side?
A. reset trunk on near side
B. reset trunk on far side
C. reset trunk on far and near side
D. restart call manager service
Correct Answer: A Explanation
QUESTION 2
What is the recommended maximum one-way latency for voice and video networks?
A. 100 ms
B. 150 ms
C. 200 ms
D. 300 ms
Correct Answer: B Explanation
QUESTION 3
An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. A network engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified Communications Manager.
How should the engineer instruct the user to launch the IP phone applications?
A. Select the “?” button on the IP phone.
B. Select the globe button on the IP phone.
C. Select Settings > User Preferences.
D. Select Settings > Device Configuration.
Correct Answer: B Explanation
QUESTION 4
Use the router console to view the configuration and answer the question.
When a call is placed from the Branch Router phone to the PSTN number of 914085551212, the call is failing. What dial-peer is supposed to be used and why is the call failing? Select 2 (two)
A. dial-peer voice 910 pots
B. dial-peer voice 9 pots
C. dial-peer voice 9001 voip
D. destination pattern is incorrect
E. prefix is missing from the dial-peer
F. the port assignment is incorrect in the dial-peer
G. the port number is missing in the dial-peer
Correct Answer: BF Explanation
Explanation/Reference:
The dial 9, 910, and 9001 dial peer configurations are shown below:
Here we see that dial peer 9 and 910 match the same destination pattern, but 9 will be used first. However, the port used should be 0/0/0:15 not 0/0/0:12.
QUESTION 5
An engineer receives a service ticket because a user cannot log into Cisco Unified CM User Options. Where can the engineer verify that the user account is active?
A. LDAP System Configuration
B. LDAP Directory
C. End User Configuration
D. LDAP Authentication
E. Route Plan Report
Correct Answer: C Explanation
Explanation/Reference:
QUESTION 6
A user reports that several IP phones in a single department are displaying a continuous “registering” message. Which fault domain should be investigated?
A. network router
B. Cisco Unified Communications Manager subscriber node
C. network switch
D. IP phones
E. SIP gateway
Correct Answer: C Explanation
QUESTION 7
User A notices echo on a call with user B. Both users are using Cisco VoIP phones. User B is using a headset, and user A is using a handset. What is the most likely source of the echo?
A. user A handset
B. user B headset
C. disabled echo cancellation on user A phone profile
D. disabled echo cancellation on user B phone profile
Correct Answer: B Explanation https://www.gk4exam.com/exam/300-206.html